Description

Features:

1. Indicator light: usually the indicator light indicates that the sampling is running

2. There are three trigger modes: automatic mode, normal mode and single mode.

3. Trigger slope: the trigger slope determines whether the trigger point is on the rising edge of the signal or on the falling edge.

4. Trigger level: For repeated signals, the trigger level can stabilize the display. For single signal, the trigger level can be captured

5. Save Settings: When you exit the setup interface, all the parameters of the setup interface and the main interface will be saved in EEPROM.

6. Waveform generator: PWM (PWM generator) and SIN (sine wave generator), adjust RP1 and RP2 to change the amplitude respectively.

Parameter:

Supply voltage: DC 5V (micro usb)

Voltage range: 0~30V (LSB adjustment required)

Level sampling: 10kHz@100us/div

Sec/div: 500ms, 200ms, 100ms, 50ms, 20ms,

10ms, 5ms, 2ms, 1ms, 500us, 200us, 100us

Board size: 57*35mm

Finished size: 57*35*30mm

Package include:

DIY loose parts*1